The global packaging market keeps expanding. By industry estimates, the global bottled water market exceeds USD 350 billion in 2026, and annual production of plastic bottle caps alone runs into the hundreds of billions of units. Every one of those caps, preforms, and 5-gallon water bottles starts its life in an injection mold — which is why mold efficiency directly decides a packager's bottom line.
KSHOW, operating as Taizhou Huangyan K-Show Plastic Mold Co., Ltd., has supplied packaging molds for more than 20 years from Huangyan, China's "Mold Capital". Its portfolio spans flip-top cap molds, squeeze cap molds, pump dispenser cap molds, PET preform molds, and 5-gallon water bottle molds, backed by 30,000+ molds delivered, 100+ patents, and exports to 100+ countries. For inquiries: sale@kshowmould.com or WhatsApp: +86-18957424655.
The Simple Math of Cavity Count
For a 6-second cap cycle, the relationship between cavity count and daily output is dramatic:
|
Cavities |
Parts per day (est.) |
Relative output |
|
4 |
9,000 |
1× |
|
16 |
34,000 |
3.8× |
|
32 |
64,000 |
7.1× |
|
48 |
95,000 |
10.6× |
More cavities also spread tooling, energy, and labor costs across more parts. With a hot-runner system, the runner is eliminated entirely — scrap rate approaches zero, and cycle time drops because there is no cold sprue to cool and eject.
What Hot Runner Demands of the Mold
High-cavity hot-runner tooling is demanding: filling balance across 48 drops, individual nozzle temperature zones, and cavity-to-cavity weight variation of 0.5% or less. This is where experience separates a mold maker from a mold assembler.
Project Background
In Q4 2025, KSHOW delivered a 48-cavity hot-runner mold for a domestic daily-chemical brand producing flip-top caps (PP, 28 mm) for shampoo and lotion bottles.
|
Requirement |
Specification |
|
Part |
Flip-top cap, PP, 28 mm |
|
Cavity count |
48, hot-runner |
|
Cycle time |
≤ 7 s |
|
Weight variation |
≤ 0.5% |
|
Annual volume |
30 million caps |
Results
|
KPI |
Target |
Achieved |
|
Cycle time |
≤ 7 s |
6.3 s |
|
Weight variation (n=192) |
≤ 0.5% |
0.34% |
|
First-article approval |
— |
Passed at first T0 |
|
Scrap rate |
— |
0.4% (runner eliminated) |
|
Cost per part vs 16-cavity |
— |
−31% |
The customer's 48-cavity tool now produces over 9 million caps per month on a single machine, and the 31% cost reduction per cap has funded the follow-on order of two more identical tools.
PET Preform Molds
Preform molds typically run 32 to 64 cavities, producing thick-wall PET preforms that are later blow-molded into bottles. Key factors include gate vestige control, precise wall-thickness distribution, and crystallinity control for consistent stretch-blow performance.
The 5-Gallon Water Bottle Mold
For large containers, KSHOW's 5-gallon (18.9 L) PC/PET water bottle molds demonstrate the other end of the spectrum: lightweighting (bottle weight reduction), high transparency, and survival of 5,000+ drop test cycles. A South American client reported that the lightweighted barrel design cut material cost by 8% while meeting every drop and pressure test.
l Higher cavity counts: cap molds moving from 32 to 64 cavities as hot-runner balance technology matures
l Lightweighting: thinner walls and lighter preforms cut resin cost and carbon footprint
l Recycled content : molds must process rPET and PCR resins with wider viscosity variation
l Automation integration: molds designed for robotic take-out and vision inspection from day one
📊 Data chart : See fig_packaging_cavity_charts.html — cavity count vs daily output + packaging mold product matrix.
For packaging mold inquiries, quotations, or technical consultation:
|
Channel |
Details |
|
Company |
Taizhou Huangyan K-Show Plastic Mold Co., Ltd. (KSHOW) |
|
Address |
No.18 Shangxian Road, Beicheng Industrial Zone, Huangyan, Taizhou, Zhejiang, China |
|
Phone / WhatsApp |
+86-18957424655 |
|
|
sale@kshowmould.com |
|
Website |
www.taizhoumold.com |
|
Track Record |
20+ years |
